CallCall: 770.423.0934EmailEmail: info@ryeco.com

Consumables, Spare Parts & System Hot Swaps

Consumables: Dye Products
( Click image to enlarge )
Consumables: Dye Products

Consumables: Dye Products

RYECO, Inc. provides food grade water-based dyes for the RYECO System II Edge Crack Detection and Marking System and all RYECO Edge Marking Systems. Dye colors are available in blue, red, yellow and green.

The non-hazardous dye is produced in a liquid form and is formulated with special preservatives to insure the correct consistency to work with all RYECO Markers. Countless tests have been performed on the consistency of the dye to insure optimum performance of the marking module.

Only full strength RYECO approved dye should be used in all RYECO Edge Crack Detection and Edge Marking Systems. Adding water as well as mixing the dye colors is not advised and will dilute the preservatives which inhibit biologica


System Hot Swaps
( Click image to enlarge )
System Hot Swaps

System Hot Swaps

The "Hot Swap" consists of the all the modules of the marking subsystem with the exception of the Actuator Station: Extension Tube, Edge Tracking Module, Edge Marking Module and/or Edge Crack Detection Module. The "Hot Swap" is preassembled with mounting clamps to easily replace the existing marking assembly quickly. Hot Swaps are available for all 3g Markers and are recommended with the purchase of an Edge Marking System.

  • Preventive Maintenance and Spare Marking Substation
  • Reduce or eliminate excessive down time for maintenance
  • Provides convenient method for quick swap out of equipment
  • Marker Test Station is included with Hot Swap purchase at N/C to be utilized to test the operation of the extention tube, EMM and ETM in a test area away from the paper machine.
  • The Marker Test Station is also used to flush tubing, solenoids and sprayers in test area away from paper machine.
  • Properly maintained equipment produces quality marks